Fire proof anti condensation potting silicone AB potting compound for voltage transformer potting and ring network cabinet potting polymer

APPLICATION

        Many electrical equipment failures are caused by moisture and moisture. How to prevent moisture and dehumidification of electrical equipment has always been the concern of power operation and maintenance personnel. In the humid environment, indoor power facilities are facing more and more obvious threats, which have a great impact on the safe operation of electrical equipment. In electrical engineering, when the relative humidity is greater than 80% RH, it is called high humidity; high humidity is the main cause of electrical equipment accidents.

        If you want to be able to prevent moisture and dehumidification, you need to block the immersion of moisture and humid air. How can you do this? You can block the bottom of the cabinet with high polymer moisture before it is put into use or when it is transformed, and cut off the path of hot and cold air circulation. On the one hand, you can avoid moisture, and if there is no moisture, it will not condense naturally. On the other hand, you can prevent small animals from entering Damage to electrical equipment.

USING INSTRUCTION

Mix ratio: two in one polymer material with high active chemicals, organic silicon compound. The ratio of A and B is 10:1.

Stir evenly: mix a and B for about 2-3 minutes, subject to uniform stirring.

Pour into the cabinet: after mixing, the plugging agent still has good fluidity within the operation time range, automatically flows into the target area, does not need to be smoothed, and the construction is simple. It can quickly and conveniently flow through the complex through pipes or cables and other cabinets, fill the irregular surface, and finally form a solid shape.

Curing performance: after the plugging agent is stirred evenly, there is about 20 minutes of operation time. After the surface of the AB mixture is dry, the field application can be completed, and a solid closed cell matrix can be formed in 1-2 hours.

Chemical resistance: it can prevent the chemical corrosion of base from gasoline, petroleum, dilute acid and alkali,  most unsaturated hydrocarbons.

Re repair: new cable or secondary construction can be carried out with woodworking knife. After completion, pour some moisture-proof plugging agent into the opening to seal the area. After the new cable or pipeline is installed, the area can be re sealed by using some moisture-proof plugging agent, which is convenient for repair.

ADVANTAGES

* Flame retardant UL: 94V-0 [ E354635 ]

* High safety: waterproof, moisture-proof, dust-proof, prevent small animal invasion, fire retardant

* Simple operation: simple construction, single person operation, no auxiliary (electricity, fire and water, etc.)

* Good fluidity: fully flow on the sealing surface and automatically level before curing

* Resistant to all kinds of harsh environment: anti-corrosion, can withstand all kinds of harsh environment

* Tight adhesion: closely combined with cable sheath and surrounding building structure, no corrosion reaction

* Solid structure: solid molecular closed cell matrix structure, toughness, light weight after molding, will not break or fall

* Long effect: no deformation, deterioration and cracking after curing, and the service life is more than or equal to 10 years

* Convenient construction: it can be used on the suspended floor or directly on the floor. It is an ideal choice for the safety protection of electrical equipment, and the secondary opening is simple and convenient